Lifting Hooks for Cranes
With the evo range of lifting hooks for cranes, elebia, the market leader in automatic lifting solutions will boost the safety and productivity of your cranes. The patented evo automatic hooks range from the 2.5 tons capacity of the evo2 crane hook to 25 tons capacity and allow you to hook on and release any load remotely.
The patented safety hook is equipped with a magnet in its lower section. When the magnet is close to the load, it attracts and correctly positions the sling. The operator pushes the control button, the hook closes, catches the ring and lifts the load without any additional handling.
The automatic crane hook works with cable slings, chains slings, master links, textile slings and even big bags. With the unique elebia automatic hook, you will be able to pick up and release loads remotely, avoiding any handling and moving, minimising risks, enhancing safety and increasing productivity.
How does it work?
The evo automatic lifting hooks lift and release the load remotely.
The remote controlled crane hooks generate a magnetic field that
1. attracts the rigging gear or lifting accessory…
2. …orients it…
3. …and centers it.
The operator then presses the “close” button on the remote control to automatically close the lifting hooks for cranes, without any manual intervention, operating remotely from a safe distance.
See more videos on how the patented evo automatic lifting hooks engage and release any load remotely in different applications and in different industries.
A sensor in the magnet indicates when the ring is in position. All this information is recorded in the eMAX remote control that acts as a hub gathering all the information and recording all the activity of the hook.
We’ve redesigned the high capacity battery to improve efficiency and minimise energy consumption of the hook. The battery is fully charged in 3 hours, and allows up to 5,000 cycles or 250 hours in standby mode.
The new gearmotor allows you to release up to 20 kg. (40.09 lbs.) There will be no more problems with heavy rigging and with the precise electronic torque control, you can adjust the release limit. It is also clutch protected from overloads.
Designed to work in the toughest conditions (steelworks, ports, low temperatures) and built with the best materials. WELDOX body of high strength steel, forged hook type T or V.
The evo range of lifting hooks for cranes was designed to enhance safety and increase productivity. It is designed under a fail-safe principle. The automatic hook CAN NOT drop a suspended load. This is a feature of all our designs, geometrically fail-safe, without any sensors or electric components.
Our automatic hooks come with a unique magnetic system, formed by 32 neodymium permanent magnets. These magnets are placed in a precise configuration that generate an oriented magnetic field with 3 functions: attract, center and orient the masterlink. The complete range of our automatic hooks carry this basic component, which allows the remote engage of loads.
Other options can also be configured with the automatic hooks:
REF.: OPTION S
A sensor in the magnet indicates when the masterlink is attached to it. This info is displayed in the eMAX remote control. Units with the magnet sensor can be configured in ‘Autoclose Mode’: the hook will automatically close when the magnet sensor detects the ring is in position. The magnet sensor’s sensitivity/trigger level can be adjusted to customer needs.
REF.: OPTION PM (Not available for evo2)
Increased magnetic power.
Power Magnet & Rigid Safety Latch
REF.: OPTION PMA (Not available for evo2)
Void, No Magnets
REF.: OPTION V
No magnetic system.
The complete range of lifting hooks for cranes can be upgraded with a load cell to weigh the load that is being lifted. This cargo cell is accurate, powerful and fully integrated into the hook, representing no increase in weight or dimensions of the unit. The load cell is highly recommended for preventing overloads and as an additional safety measure. Load cells can also be retrofitted into older models of our hooks.
The load cell in combination with the eMAX remote control transforms all of our hooks into a precise weighing scale with advanced features.
|evo2 – Ref.Option LC2||evo5 – Ref.Option LC5||evo10 – Ref.Option LC10||evo20 – Ref.Option LC20||evo25 – Ref.Option LC25|
|Load Cell Type||Compression / Flexion Ring||Compression / Flexion Ring||Compression / Flexion Ring||Traction||Traction|
|Material||Stainless Steel||Stainless Steel||Stainless Steel||Stainless Steel||Stainless Steel|
|Protection||IP67 (EN60529)||IP67 (EN60529)||IP67 (EN60529)||IP67 (EN60529)||IP67 (EN60529)|
|Nominal Capacities (Ln)||2,500||5,000||10,000||20,000||25,000||Kg|
|Minimum Dead Load||0||0||0||0||0||%Ln|
|Total Error||< ±0.2||< ±0.2||< ±0.2||< ±0.2||< ±0.2||%Sn|
|Repeatability Error||< ±0.04||< ±0.06||< ±0.08||< ±0.08||< ±0.08||%Sn|
|on zero||< ±0.01||< ±0.01||< ±0.01||< ±0.01||< ±0.01||%Sn/5ºK|
|on sensitivity||< ±0.01||< ±0.01||< ±0.01||< ±0.01||< ±0.01||%Sn/5ºK|
|Creep Error (30 min.)||< ±0.03||< ±0.03||< ±0.03||< ±0.03||< ±0.03||%Sn|
|Temperature Compensation||-4 ºF to 122 ºF||-4 ºF to 122 ºF||-4 ºF to 122 ºF||-4 ºF to 122 ºF||-4 ºF to 122 ºF||ºC|
|Temperature Limits||-22 ºF to 158 ºF||-22 ºF to 158 ºF||-22 ºF to 158 ºF||-22 ºF to 158 ºF||-22 ºF to 158 ºF||ºC|
|Nominal Sensitivity (Sn)||2 ±0.25%||2 ±0.25%||2 ±0.25%||1 ±0.25%||1 ±0.25%||mV/V|
|Nominal Input Voltage||10||10||10||10||10||V|
|Maximum Input Voltage||15||15||15||15||15||V|
|Input Impedance||800 ±30||800 ±30||800 ±30||800 ±30||800 ±30|
|Output Impedance||700 ±5||700 ±5||700 ±5||700 ±5||700 ±5|
|No Load Input||< ±2||< ±2||< ±2||< ±2||< ±2||%Sn|
|Insulation Resistance||> 5,000||> 5,000||> 5,000||> 5,000||> 5,000||M|
|Maximum Deflection (at Ln)||0.4||0.4||0.4||0.3||0.3||mm|
The innovative position encoder has been integrated into the evo10, evo20 and evo25 lifting hooks for cranes representing an added safety element in all lifting operations. The encoder highlights a technical upgrade of our remote hooks, as it allows to know the exact angular position of the hook at any given moment thanks the information relayed to the eMAX remote control.
This important feature comes in very handy in operations where the operator can not see the hook’s position. The automatic hook’s status is displayed on the eMAX remote control, transmitting real time information to the operator.
With the position encoder and the eMAX remote control, the user is always aware of the hook’s status (open/closed) and is informed with the buzzer/vibrator and display features of the eMAX if the load is not placed correctly on the safety hook. (e.g. tip of the hook)
With the specifications of this advanced feature, the chances of impacts are reduced, the life-span of the motor and clutch increase and most importantly, safety is enhanced in all lifting operations.
The position encoder can be retrofitted into older units of the evo10, evo20 and evo25 (*except for versions with a spring loaded latch)
As of January 2019, the evo5 lifting hook will also include the position encoder.
Simply open and close the automatic crane hooks or receive real-time information of weight, battery level, and other values of the lifting and manoeuvring operation.
Just like our lifting hooks for bell furnaces and automatic lifting clamps, the automatic crane hook can be paired to the eMAX, eMINI or Installable remote controls.
The standard automatic hook units are rugged, designed and built to work in almost
every industry. For special environments, you have the following options:
C5M Painting and AISI components.
Offshore Wind Turbines, Onboard Cranes, Buoys
More Info here
DNV 2.22 certification for Offshore lifting appliances.
Offshore Wind Turbines, Onboard Cranes
More Info here
Units with IECEx certification for zones 1 & 21 according to European Directive 2014/34/EU and IECEx international standards.
IECEx certification to work on sites classified as zone 1 & zone 21 according to the European Directive 99/92/EC and IECEx international standards.
Operations in potentially explosive atmospheres
Oil & Gas, Mining & Chemical
More Info here
Heat shield that protects the automatic hook and its electronic components from radiated heat and extended temperature working range.
Operations where the automatic hooks are subject to extremely elevated temperatures and radiated heat
More Info here
Our products certify with the following regulatory standards
|ASME B30.10-2009||UNE-EN 60204-1:2007||D89/391/EEC|
|ASME B30.20-2010||UNE-EN 61000-6-4:2007||D89/654/EEC|
|UNE-EN 1050||UNE-EN 61000-6-2:2006||D89/655/EEC|
|UNE-EN 1677-1:2001 + A1:2009||UNE-EN ISO12100:2012||D89/656/EEC|
|UNE-EN 1677-2:2001 + A1:2008||EN 10204 3.1.B||D92/58/EEC 9a|
· Directive on Machine Safety (D2006/42/EC).
· Assurance of Production Quality in accordance with ISO9001.
· DNV 2.22 Certified (evo5 / evo10 / evo20).
· ARIB Construction Design Certification Number 203-JN0689.
· FCC Identifier 2ACLHEVO for Equipment Class: Digital Transmission System.
· Each mechanism is delivered with the CE stamp and a declaration of CE conformity.
· elebia is a member of F.E.M. (European Federation of Materials Handling).
Need or want to see in
person which automatic hook
best fits your needs?